Fully threaded rods / all-thread
Supply is configured to the requested thread system, diameter, pitch, standard or cut length, material, grade, coating and EN 10204 3.1 certificate requirement.
Request quoteDirect supplier from Turkey · Specification-led RFQ
Threaded Rods, All-Thread & Stud Bolts Supplied from Turkey
FastenersFromTurkey directly supplies fully threaded rods, all-thread, stud bolts, and double-end, tap-end or drawing-specific studs from Turkey for industrial export RFQs. Metric and inch threads, ASTM A193 Grade B7 or B7M requirements, the specified ASTM A194 nut grade, coatings, tests and EN 10204 3.1 certificates are supplied to the stated order specification.
- Fully threaded rods / all-thread, stud bolts, double-end, tap-end and custom studs
- Metric and UNC / UNF inch thread systems supplied to the requested specification
- ASTM A193 Grades B7 and B7M kept distinct; the specified ASTM A194 nut grade is supplied
Threaded rods, all-thread and stud bolts supplied by requested product form
RFQ qualification
Threaded rod and stud order qualification summary
Confirm these order-specific inputs before quotation.
Fasteners From Turkey
Confirmed per RFQ
| Field | Order input | Confirmation |
|---|---|---|
| Product form | Fully threaded rod / all-thread, stud bolt, double-end stud, tap-end stud or drawing-specific stud | The requested product form defines the supply route |
| Standard or drawing | ASTM A193 Grade B7 or B7M, other applicable product standard, buyer specification or controlled drawing and revision | The stated requirement governs the order |
| Thread and length | Metric or inch thread, diameter, pitch, overall length, thread coverage and tolerances | Thread systems are never mixed |
| Material and grade | Required material and mechanical or high-temperature designation, including ASTM A193 Grade B7 or B7M | The requested grade is supplied to its governing specification |
| Nuts and coating | Mating nut quantity and grade, finish, coating and lubrication | Assembly scope confirmed per RFQ |
| Testing and certificates | Mechanical, dimensional, PMI or other specified tests, traceability and EN 10204 3.1 certificates | The specified test and certificate package is supplied with the order |
| Commercial | Quantity, packing, Incoterm and destination | Commercial basis stated in the quotation |
| Supplier role | FastenersFromTurkey directly supplies threaded rods, all-thread and stud bolts from Turkey. | Supply scope follows the RFQ |
ASTM A193 Grades B7 and B7M are supplied as distinct requirements. State the exact grade, service conditions and matching ASTM A194 nut grade; Grade 2H is supplied where specified.
Product form
Specify the threaded product demanded by the order
The same thread designation can appear on different product forms with different standards, end geometry, length rules, materials and evidence requirements.
Stud bolts
Stud bolts are supplied to the requested standard, overall length, thread length, grade, ASTM A194 mating nut grade, finish, tests and certificates.
Request quoteDouble-end, tap-end or drawing-specific studs
Drawing-specific and special-service studs are supplied to the stated geometry, ASTM A193 or buyer material designation, heat treatment, tests, marking and traceability.
Request quoteStandards and RFQ inputs
Threaded rod, all-thread and stud bolt specifications
Product form, governing specification and service requirements define the exact supply configuration beyond diameter and length.
| Decision | What to specify | Qualification rule |
|---|---|---|
| Product form | Fully threaded rod / all-thread, stud bolt, double-end stud, tap-end stud or drawing-specific stud | The requested form is supplied as specified |
| Thread system | Metric pitch and tolerance or inch UNC/UNF class | Metric and inch systems remain separate |
| Dimensions | Diameter, overall length, threaded lengths, plain shank, chamfers and end form | State the drawing measurement basis and tolerances |
| Material and grade | ASTM A193 Grade B7 or B7M, applicable ISO, ASTM, ASME or buyer designation | B7 and B7M remain distinct grades; the stated requirement governs |
| Special service | Temperature, pressure, corrosion, hardness, heat treatment and governing code where applicable | Material, heat treatment and tests are supplied to the stated service requirement |
| Assembly and evidence | Specified ASTM A194 nut grade, including Grade 2H where required, washers, coating, lubrication, tests, marking, EN 10204 3.1 and traceability | The complete assembly and document package is supplied to the order specification |
Why FastenersFromTurkey
Direct supply built around the demanded product form
FastenersFromTurkey directly supplies the requested threaded rod, all-thread or stud bolt requirement from Turkey.
Demand-led product scope
Fully threaded rods, all-thread, stud bolts and drawing-specific or special-service studs are supplied as distinct product forms.
Assembly review
Thread, grade, length, end form, nuts, coating, lubrication and evidence are considered together.
Export quotation scope
Quantity, packing, destination, Incoterm, testing and certificate requirements are recorded in the quotation basis.
Quality and documents
Specify tests and certificates in the RFQ
The requested material, process, testing, traceability and EN 10204 3.1 documentation are built into the supply scope.
Material and mechanical evidence
State the governing designation and certificate requirement, including ASTM A193 Grade B7 or B7M.
Dimensional and thread checks
Define thread class, lengths, end geometry and any gauge or inspection-plan requirement.
Special tests and traceability
State PMI, hardness, impact, high-temperature or other required tests, marking, lot traceability and third-party involvement where applicable.
Applications
Service conditions define the requirement
Threaded rods and studs can be used in machinery, industrial assemblies, maintenance and specified process-equipment joints when the governing requirement is complete.
General industrial assembly
Provide joint stack, thread engagement, tightening method, grade, finish and environmental conditions.
Machinery and maintenance
State the original standard or drawing, end geometry, lengths, mating nuts and replacement approval.
Special-temperature or pressure service
Provide the governing code or customer specification, material designation, temperature, tests and traceability; the product and evidence package are supplied to those requirements.
Ordering process
From product form to export quotation
- 01
Send the requirement
Provide standard or drawing, product form, thread, dimensions, grade, nuts, coating, tests, certificates, quantity and destination.
- 02
Close open points
We confirm product route, exact lengths, end form, mating parts, service conditions and evidence.
- 03
Set the supply scope
We set the product, tests and certificate package to the stated order requirement.
- 04
Issue the quotation
The quotation states scope, commercial basis, documents, packing and delivery assumptions.
RFQ FAQ
Threaded rod and stud buying questions
What do all-thread, threaded rod and stud bolt mean?
All-thread and threaded rod generally describe a continuous externally threaded length. A stud bolt or other stud may have a defined end form, partial-thread arrangement, engagement rule or service specification. State the required product form so it is supplied to the correct dimensional and material requirement.
Do you supply ASTM A193 Grade B7 and B7M stud bolts?
Yes. ASTM A193 Grades B7 and B7M are supplied as distinct requirements, not as automatic equivalents. State the exact grade, service conditions and matching ASTM A194 nut grade; Grade 2H is supplied where specified.
Should nuts be included in the RFQ?
Yes, when the supply includes nuts. State the number per rod or stud, nut standard and grade, thread, coating and any washer or lubrication requirement so the assembly is reviewed together.
What should I send for a threaded rod or stud quote?
Send the product form, standard or controlled drawing, metric or inch thread, diameter, pitch, overall and threaded lengths, material and grade, nuts, coating, tests, certificates, quantity, packing, Incoterm and destination.
Request a quote
Send your threaded rod, all-thread or stud bolt RFQ
Share the product form, standard or drawing, thread, grade, lengths, nuts, coating, tests, certificates, quantity and destination for order-specific review.
Email: sales@fastenersfromturkey.com
Phone: +90 543 928 19 76
Ready to quote
Name the threaded product and governing standard
Send the all-thread, stud bolt or special-stud demand with its standard, dimensions, grade, nuts, coating, certificates and quantity.
Request quoteRelated products
Complete the threaded assembly
Hex nuts
Review nut thread, class or grade, proof requirement, coating and mating compatibility.
View hex nuts
Hex bolts
Review full or partial thread hex bolts by standard, class, dimensions and finish.
View hex bolts
Custom bolts
Use the drawing-led route when a headed externally threaded part has non-standard geometry.
View custom boltsThreaded rod / all-thread, stud bolt, double-end, tap-end and drawing-specific studs are supplied as defined product forms. ASTM A193 Grades B7 and B7M remain distinct; state the governing specification, thread, dimensions, matching ASTM A194 nut grade, tests, EN 10204 3.1 certificate and service conditions.